Skip to content


My heater will not light, what do I do?

Check that the regulator is turned to 'on' position. Hold button down 10-15 seconds to allow gas to reach pilot light, release and press for ignition. Hold down button for further 10-15 seconds so that the gas valve holds open. Proceed to select heat setting. If the pilot is blocked, remove the blockage. If you are still unable to light it, please contact us.

Was this answer helpful?

Thank you for letting us know

595 people also found this answer helpful

We're sorry to hear that

Your response has been recorded. If you would like to get in touch, please visit contact us