Skip to content

Question

There’s a poor or no flame on my appliance

There is a possible air pocket in the cylinder. Take into the open air and release the air/gas mixture for about 30 seconds by depressing valve central shaft (using non metallic rod; pencil or pen top). Take back indoors and repeat the ignition process. The cylinder may be too cold if freezing conditions – allow time for it to rise in temperature indoors before lighting. 

Was this answer helpful?

Thank you for letting us know

157 people also found this answer helpful

We're sorry to hear that

Your response has been recorded. If you would like to get in touch, please visit contact us